Welding Weight and Cost Calculator

Terms Used in Welding Weight and Cost Calculator

Root Gap (r)

It is root gap for welding of two metals. You can use any dimentional units such as Inches or MM as per your prefererance. if you are using Inches as units for your input values then please refer decimal fractional chart to enter proper input values.

Root Face (f)

It is root face prepared during welding edges preparation for welding of two metals. You can use any dimentional units such as Inches or MM as per your prefererance. if you are using Inches as units for your input values then please refer decimal fractional chart to enter proper input values.

Bevel Angle (α) :

It is bevel angle of welding edges prepared during welding edges preparation for welding of two metals. You have input this angle in degrees.

Weld Bed Height (h) :

It is height of welding material excess from top of the welding metal top face. You can use any dimentional units such as Inches or MM as per your prefererance. if you are using Inches as units for your input values then please refer decimal fractional chart to enter proper input values.

Weld Bed Offset (o) :

It is ecxess welding metal deposited from welding edges. You can use any dimentional units such as Inches or MM as per your prefererance. if you are using Inches as units for your input values then please refer decimal fractional chart to enter proper input values.

Root Face Start Distance from Top Side (s) :

It is distance of root face from the top of the joining metals. You can use any dimentional units such as Inches or MM as per your prefererance. if you are using Inches as units for your input values then please refer decimal fractional chart to enter proper input values.

Plate Thickness (t) :

Plate Thickness of welding joining metal. You can use any dimentional units such as Inches or MM as per your prefererance. if you are using Inches as units for your input values then please refer decimal fractional chart to enter proper input values.

Weld Length :

It is length of total weld joint. You can use any dimentional units such as Inches or MM as per your prefererance. if you are using Inches as units for your input values then please refer decimal fractional chart to enter proper input values.

What are Types of Welding Joint options available in this Welding Weight and Cost Calculator

In this Welding Weight and Cost Calculator, we have the following Types of options are available.

1. Square Butt Weld Welding Calculator
2. Single Bevel Butt Weld Welding Calculator
3. Double Bevel Butt Weld Welding Calculator
4. Double Bevel Variable Angle Butt Weld Welding Calculator
5. Single V Butt Weld Welding Calculator
6. Double V Butt Weld Welding Calculator
7. Double V Variable Angle Butt Weld Welding Calculator

How to Use this Welding Weight and Cost Calculator

1. Firstly Navigate to the Welding Weight and Cost Calculator and Select the Type of calculator option from Selection pannel.
2. After calculator Types Selection you have to refere standard input image of this types of Weld type configuration and make list of dimensions required in this calculator and keep handy this dimentions.
3. Select Input Dimensions Stanarad Units from Unit selection pannel. if you are using inches as dimenions then please refer to note below input selection to refere decimal factor selection chart.
4. Input all the dimension required in given input fields as per your unit selection. All dimensions are required to fill before moving ahead.
5. after completing all input field data click on calculate button to generate output of result of your selected calculator options.
6. If you left any input field empty then it will show you an error notification so if you are getting this notification then check all your empty fields and enter correct data to generate results.
7. Navigate below to calculate button to see generated output result dimensions.

if you want to learn the fabrication layout marking method of Pipe Branch Connections then click here to download our ebook “Master in Fabrication Layout Development”. In this book all both Geometrical and Numerical Method of fabrication Layout of all types of the branch pipe connections.

Why Should Use this Welding Weight and Cost Calculator

1. Weldng Weight and Cost Calculator used for welding weight calculations of all types of Joints.
2. Weldng Weight and Cost Calculator used for welding material requirement calculations of all types of Joints.
3. You can Save Time on your Welding Calculations.
4. An easy, accurate and Faster way to Welding Weight and cost calculations.

Application Area of Welding Weight and Cost Calculator

Welding weight and Cost Calculator is used to calculate welding weight, welding cost, welding material requirement for all types of joints used in pressure vessel and other types of fabrication Industry where welding process is used.

Click here to Download App for Android Device.

Click here to Download App for Apple Device.

If you are looking for Various other useful fabrication Apps for your daily fabrication activity then Click here

If you want to increase your knowledge by learning from us then you can join our various video courses in the field of fabrication Click here to know more about our courses